BDS Paints Logo

Skip to Main Content »

Search Site

You're currently on:

7100 Range

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 7100 Range

Rustoleum 7100 Standard Floor Coating

Availability: In stock.

£ 0.00

Quick Overview

7100 Floor Paint is an industrial quality high build coating available in standard glossy or anti-slip finish. It is designed for inside and outside use onto cured, dry concrete and cement, wood and over primed or painted metal. It is for domestic and light industrial use for such jobs as garages, stairways, shops, factories (Not for use in factories or stores where pump trucks and fork lifts are in regular use. In this case use Pegakote) etc and for line marking.

* Required Fields

£ 0.00
Add Items to Cart

Product Description

7100 Floor Paint is an industrial quality high build coating available in standard glossy or anti-slip finish. It is designed for inside and outside use onto cured, dry concrete and cement, wood and over primed or painted metal. It is for domestic and light industrial use for such jobs as garages, stairways, shops, factories (Not for use in factories or stores where pump trucks and fork lifts are in regular use. In this case use Pegakote) etc and for line marking.



Preparation
The floor substrate should be dry, clean, porous and free from oil and any other forms of contamination. Sound, painted floors or oil spots should be cleaned with Green Magic. Green Magic should be scrubbed into the floor, left wet for 15 minutes, then re-scrub and wash twice with clean water to remove the Green Magic and contamination and allow to dry.
Holes, cracks and imperfections in a concrete floor can be filled with Concrete Repair Mortar or Fine Crack Repair.

Coating
For bare substrates apply two or three coats, while previously painted floors apply one or two coats.
The 7100 should be applied by brush or roller @8m²/L and 24 hours drying allowed between coats.

Tip: When applying by roller always apply the paint in one direction and then lay off at 90°C to the application direction. This should be maintained the same way through the entire job. This makes sure that all the pigment lies down the same way and the final appearance is improved. 7100 can be trafficked after 24 hours but is not fully cured until after 7 days.
If an anti-slip coating is required then the final coat of 7100 should be applied with the anti slip grade. If the chosen colour is not made in anti slip then the transparent anti slip grade should be used as the final coat.

Additional Information

Data / Info Downloads Data Sheet